Filter
Top Products
AT Commands
Page 25
Example 3 - Answering incoming calls
B Command Setting: B9
Terminal Speed: 38,400 bps
Flow Control: On (&K3 for RTS/CTS flow control)
If you wish your modem to answer incoming calls, use these settings. This will allow your
modem to connect at any speed between 14,400 bps and 300 bps. If you are using a software
program that controls the answering of your modem (as some bulletin board systems do) you
may need to issue an ATS0=0 command to disable auto-answering, otherwise issue ATS0=2 to
make the modem answer calls after two rings (the default setting).