Filter
Top Products
Page 202
V.25BIS - RST Reset
Your modem is supplied with a default operating set up. You can change this temporarily by
issuing commands while you are working, or permanently by using the &W command to store
changes you’ve made in non-volatile memory.
The RST command returns the modem to the last saved configuration and causes it to perform a
power-on self-test.
☞☞
☞☞
☞
When you issue the RST command, you must issue an ATZ command to select
V.25bis command mode. Your modem always resets and powers up in AT command
mode, regardless of the setting of the #M command.
Options
RST Reset the modem and restore the saved configuration profile
See Also
&F command Restore Factory Defaults
&F. command Reinitialise modem
&W command Write Configuration