Filter
Top Products
EPA ENERGY STAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the ENERGY
STAR programme, to encourage the widespread and voluntary use of energy-efficient technologies that enhance
the workplace, improve product performance and prevent pollution. As an
ENERGY STAR Partner, the TOSHIBA
TEC CORPORATION has determined that this copier model meets the
ENERGY STAR guidelines for energy
efficiency.
ENERGY STAR guidelines for this class of copier require ENERGY STAR copiers to have an ‘Off Mode’ feature
that automatically turns the copier off after a period of inactivity, ensuring night and weekend shutoff. The copier
must also automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the
last usage.
For Copier/Printer + Fax models,
ENERGY STAR guidelines for this class of copier require ENERGY STAR
Multifunction copiers to have a ‘Sleep Mode’ feature that automatically makes the copier enter the sleep mode
after a period of inactivity. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy
Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.
e-STUDIO350/450 Copier model (Base model)
‘Automatic Energy Save’-
The copier consumes less than 139.75 watts (e-STUDIO350)/178.25 watts (e-STUDIO450) during Energy
Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Off Mode’
The copier consumes less than 15 watts (e-STUDIO350)/20 watts (e-STUDIO450) in the ‘Off Mode’.
‘Off Mode’ Default Time-
The default time for the ‘Off Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
e-STUDIO350/450 Copier/Printer + Fax model (Multifunction model)
‘Automatic Energy Save’-
The copier consumes less than 184.75 watts (e-STUDIO350)/223.25 watts (e-STUDIO450) during Energy
Save.
‘Automatic Energy Save’ Default Time-
The default time for the ‘Automatic Energy Save’ is 15 minutes.
‘Sleep Mode’
The copier consumes less than 80 watts (e-STUDIO350)/95 watts (e-STUDIO450) in the ‘Sleep Mode’.
‘Sleep Mode’ Default Time-
The default time for the ‘Sleep Mode’ is 60 minutes (e-STUDIO350)/90 minutes (e-STUDIO450).
Note1- The default setting for the ‘Off Mode’ or ‘Sleep Mode’ and ‘Automatic Energy Save’ can be changed.
Note2- For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts
warming itself up and prints out the data when it becomes ready. Also, when the start button or the
energy saver button on the control panel is pressed, the copier starts warming itself up.
Note3- For Base model, the copier automatically shuts off in off mode. To use the copier again, turn the power
switch on.
Note4- For Base model, after an automatic shutoff, weekly timer feature cannot be activated. If you prefer to
activate this feature, contact you authorized Toshiba dealer.
In accordance with EPA
ENERGY STAR programme guidelines, Toshiba recommends the following recycled
paper.
Great White MultiUse 20 paper
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper,
please contact your authorized Toshiba dealer.
ENERGY STAR is a U.S. registered mark.