Filter
Top Products
40
2.HOW TO MAKE COPIES
1.SETTING COPY PAPER (Cont.)
2
Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is
left between the paper and the side guide. If there is no gap, this
could cause paper misfeeding.
7
Push the drawer straight into the copier
until it comes to a stop.
- Be sure to push the drawer fully in.
Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
8
Change the size mark plate to match with
the size of paper that has been set.
9
Press the [USER FUNCTIONS] button on
the control panel.
10
Press the [USER] button, then press the
[GENERAL] button on the touch panel.
0.5mm
(
0.02’’
)