Filter
Top Products
259
12
2
Open the fuser unit cover.
3
Holding the knob (A), open the transport
guide.
4
Remove any misfed paper inside the fuser
unit.
5
Close the transport guide and the fuser
unit cover. Push up the fuser pressure
release lever to return the jam releasing
unit cover, the automatic duplexer and the
bypass tray to the original positions.
8. Paper Misfeed in the Offset Tray Unit or Job Separator Unit (Optional)
1
Make sure that the bypass tray and the
automatic duplexer are open, then open
the jam releasing unit cover.
DO NOT touch the fuser unit and the metal area around it. Since
they are very hot, you could be burned or the shock could cause an
injury to your hand in the equipment.
(
A
)
(
A
)