250
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
3.REPLACE TONER CARTRIDGE SYMBOL (Cont.)
12
2
While pushing on the latch, open the
cartridge holder.
3
Pull the cartridge out carefully.
- If you cannot pull it straight out, pull it out rotating it clockwise.
If it cannot be pulled out, close the front cover, turn the power OFF
and then ON again. When “Install new Toner cartridge” appears,
start the procedure again from step 1.
To turn the power OFF, see "Turning off the Power (Shutting down)"
Page 30.
NEVER attempt to incinerate toner cartridges. This could cause an
explosion.
DO NOT dispose of used toner cartridges. Your service technician
will collect them.
4
Tap and shake the new toner cartridge
well to loosen the toner inside.