205
9
1C6D System error Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
1C70 SMTP client OFF Ask your administrator to enable the SMTP
Client and perform the job again.
1C80 Internet Fax transmission failure when
processing E-mail job received
Confirm the “Received Internet Fax Forward”
settings.
1C81 Onramp Gateway transmission failure Confirm the mail box settings.
1C82 Internet Fax transmission failure when
processing Fax job received
Confirm the “Received Fax Forward” setting.
1CC1 Power failure Check if the power cable is connected
properly and it is inserted securely. Check if
the power voltage is unstable.
3A10-3A12 MIME format error Ask the sender to resend the E-mail in the
MIME1.0 format.
3A20-22 E-mail process error Ask the sender to resend the E-mail.
3A30 Partial E-mail timeout error Ask the sender to resend the E-mail, or
change the Partial Wait time setting.
3A40 Invalid partial E-mail received Ask the sender to resend the partial E-mail in
the RFC2046 format.
3A50-3A52 HDD full error Ask the sender to resend the E-mail by
separating it to several E-mails. If this error
occurs because the paper empty occurs and
too much waiting jobs are stored in the hard
disc, add the paper to activate other jobs.
3A60-3A62 HDD full alert Ask the sender to resend the E-mail by
separating it to several E-mails. If this error
occurs because the paper empty occurs and
too much waiting jobs are stored in the hard
disc, add the paper to activate other jobs.
3A70 Interrupt partial E-mail reception Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.
3A80-3A82 Partial E-mail disabled Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.
3B10-3B12 E-mail format error Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.
Error Code Cause & Message Corrective Action