Filter
Top Products
68 4200FA Installation and Operation Manual
Header Bar 9.8
The Header Bar on the graphic display panel displays three system parameters: the System Load,
Current Status, and System Time.
Figure 9-5 Header Bar Detail
Table 9.4 Header Bar Components
Header Bar Components
No.
Function
1
System Load - Load per each phase as percent of full load. Low - Less than 10% Load.
2
Current Status - UPS status at the moment. (Status is delayed by a few seconds)
3
System Time - Current time in AM-PM format
Footer Bar 9.9
The Footer Bar on the graphic display panel displays three system parameters:
Figure 9-6 Footer Bar Detail
Table 9.5 Footer Bar Components
Footer Bar Components
No.
Function
1
Fault - Displays last fault sensed by UPS. A Fault causes the UPS to switch to bypass and it will
not automatically reset.
2
Warning - Displays last warning sensed by UPS. Multiple frequent warnings of the same type may
induce a fault condition.
3
UPS Mode - Selected operating mode.