Filter
Top Products
113
Learning the Basics
Using Turn Off or Shut down
5.375 x 8.375 ver 2.4.0
Stand by command
The Stand by command puts the computer into a power-
saving mode. Stand by stores the current state of the
computer in memory so that, when you restart the computer,
you can continue working from where you left off.
Factors to consider when choosing Stand by:
❖ While in Stand by mode, the computer uses some battery
power. If your computer is left in Stand by mode for an
extended period, your computer could lose data.
❖ When starting up again, this choice uses less time and
battery power than either Turn Off, Shut down or
Hibernation.
❖ On restarting, the computer returns to the state in which
you left it, and opens all the programs and files you were
using.
NOTE: If you power down using the Stand by command and the
battery discharges fully, your information will be lost. Be sure to
save your work often.
Using Turn Off or Shut down
If you are using the Windows
®
XP Home operating system,
or are using the Windows
®
XP Pro operating system and are
not a member of a domain, power off the computer as
follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.