Filter
Top Products
126
Learning the Basics
Using Stand by
5.375 x 8.375 ver 2.4.0
haven’t used it for a specified amount of time. You
can set the System Stand by time on the Power Save
Mode tab.
7 Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
8 Do one of the following:
❖ Click DC only for the settings to apply only when
you are using battery power.
❖ Click All for the settings to apply whether you are
using battery power or outlet power.
9 Click OK to close the Full Power Properties window.
10 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again from Stand by
To start the computer from Stand by mode, press and release
the power button until the on/off light changes to green. The
computer returns to the screen you were using.
If you put the computer in Stand by mode by closing the
display panel, you can start the computer again by opening
the display panel.