Filter
Top Products
34
: The PS3 Upgrade (GE-1020) or PS3 Scan & HDD Upgrade (GE-1060+GE-1110) is required to
use the PostScript Driver.
7
Click on [Add Port...].
• The Printer Ports dialog box appears.
9
Enter the IP address of the GA-1140 printer in
the “Name or address of server providing lpd”
field and a queue name in the “Name of printer
or print queue on that server” field, and click
on [OK].
• When your network uses DNS or WINS server, enter
the printer name of the GA-1140 provided from DNS
or WINS in the “Name or address of server providing
lpd” field.
• In the “Name of printer or print queue on that server”
field, you have to enter a queue name, direct, hold, or
print, on the GA-1140 printer. Enter a queue
depending on how you want to print.
direct - print jobs are sent straight to the printer
without spooling.
hold - print jobs are held until users operate copying
or moving them to the Print queue with the job
management tools.
print - print jobs are spooled to the hard disk in the
GA-1140 printer and printed out. Use this queue for
general printing.
8
Select “LPR Port” and click on [New Port...].
• When “LPR Port” is not listed, make sure the TCP/IP
Printing Service is installed on your Windows NT 4.0.
“LPR Port” is not listed unless the TCP/IP Printing
Service is installed.
• The Add LPR compatible printer dialog box appears.