Filter
Top Products
2
2-12
BASIC OPERATION
5. HOW TO SET SCANNING CONDITIONS (Cont.)
How to Set Image Density
• Set the exposure according to the contrast of the original that you are sending.
• There are two ways of selecting image density: by the automatic image density mode or the manual
image density mode.
- In the automatic image density mode, the digital copier automatically judges the contrast of the
original, and selects the ideal contrast.
- In the manual image density mode, you can adjust the contrast manually in 7 stages.
If you are sending a dark original, press the
key to lighten the contrast, and if you are sending a
light original, press the
key to darken it.
If you do not set the contrast mode, the original is sent at the contrast adjustment value preset in the
transmission mode setting. (
See page 4-24.)
Values set here are valid for only one transmission.
2
Press the key.
• If the AUTO is already displayed in the message panel, there
is no need to set it.
4
Press the key to complete the setting.
• To cancel setting midway, press the key.
3
Select AUTO by pressing the key.
ENTER TEL NUMBER(MAX128):
LIGHT AUTO
/DARK: MANUAL
ENTER TEL NUMBER(MAX128):
LIGHT AUTO
/DARK: MANUAL
ENTER TEL NUMBER(MAX128):
FEB25-2001 11:30AM M :100%
RESOLUTION:STANDARD
:AUTO
COMM.OPTION
1
Press the key.
Automatic Image Density Mode Setting Procedure