Toshiba e-studio 16/20/25 Copier User Manual


 
4
Thank you for purchasing the Toshiba GD-1060 Fax kit for e-STUDIO16/20/25. This Operator’s Manual
describes the following:
how to correctly use the e-STUDIO16/20/25 FAX functions
how to send and receive FAXes
how to inspect the FAX unit
how to remedy trouble
Before using the digital copier, thoroughly read and understand this Operator’s Manual.
Keep this Operator’s Manual in a handy place for future reference.
* This Operator’s Manual applies to the e-STUDIO16/20/25 facsimile function.
* When the digital copier is used as a copier and a printer, be sure to read the Operator’s Manual
(for Copying Function) and Operator’s Manual (for Printer Function).
To ensure correct and safe use of the Toshiba Digital Copier e-STUDIO16/20/25, this Operator’s Manual
describes safety precautions according to the following three levels of warning:
The meaning of these signal words are as follows. Before reading this Operator’s Manual, you should
fully understand the meaning and importance of these signal words.
Warning —— Indicates a potentially hazardous situation which, if not avoided, could result in death,
serious injury, or serious damage, or fire in the equipment or surrounding assets.
Caution —— Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, partial damage of the equipment or surrounding assets, or loss of data.
Note ——— Indicates a procedure you should follow to ensure the optimal performance of the digital
copier and problem-free copying.
Tip ————— Describes information useful to know when operating the digital copier.
Advice ——— Describes an operation you should follow to maintain the digital copier in good working
order.
PREFACE
For European models only:
Warning
This is a Class A product. In a domestic environment, this product may cause radio interference
in which case the user may be required to take adequate measures.
1 Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2. Before opening any covers or removing any units from the copier, discharge the static electricity
from your body by touching a metal part of the copier.
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-marking is Toshiba Europe GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany.
Phone +49-2131-1245-0.
COPYRIGHT 2000
TOSHIBA TEC CORPORATION