Filter
Top Products
2-33
2
12.
RECEPTION-TYPES OF AUTO RECEPTION MODE
Description
The FAX automatically receives incoming
originals when the bell rings.
When the bell sounds, pick up the handset
of the telephone. If the incoming call is a
telephone call, start talking with the other
party.
If you hear a facsimile tone, press the
key and the key. Select “2.RECEIVE”
and replace the handset to the cradle after
you hear the phone line switch. The original
then starts to be received.
Tip
You cannot talk with the other party un-
less an external telephone is attached.
1.
2.
Mode
AUTO RECEIVE
MANUAL RECEIVE
When to Set
Set this mode when the line is
being used exclusively by the FAX.
Set this mode when the FAX is
connected to a line that is also used
as a voice telephone line.
Setting AUTO RECEIVE Modes
1
Display the AUTO RECEIVE Mode menu.
Press:
then
2
Select the desired Receive Mode.
• To set the AUTO RECEIVE, press .
• To set the MANUAL RECEIVE, press
.
• When “1.AUTO RECEIVE” is selected, follow step 3.
• When “2.MANUAL RECEIVE” is selected, the setting
procedure is completed.
• To cancel setting midway, press the
key.
MANUAL RECEIVE is selected:
AUTO RECEIVE is selected:
AUTO RECEIVE MODE
1.AUTO RECEIVE
2.MANUAL RECEIVE
AUTO RECEIVE
RING 10
DELAY: 02
01
FAX SETUP
07.AUTO RECEIVE MODE
08.MEMORY TX
09.SECURITY TX