Filter
Top Products
MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC
4 - 4
[E] Original tray
(1) Take off the front cover.
( P.4-1 "[A] Front cover")
(2) Take off the rear cover.
( P.4-2 "[B] Rear cover")
(3) Take off the paper feeder unit.
( P.4-6 "[A] Paper feeder unit")
(4) Remove 2 screws. Lift up the feeder upper
guide by sliding it to the right.
Note: Note:
Do not pull the harness too strong.
Fig.4-10
(5) Disconnect 1 connector from the RADF con-
trol PC board.
Fig.4-11
(6) Remove 1 screw and take off the bushing.
(7) Take off the original tray.
Fig.4-12
Feeder upper guide Screw
Screw
Bushing
Screw
Original tray