Filter
Top Products
MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC
4 - 16
[L] Reverse registration roller
(7) Remove 2 screws. Open the post-reading
lower guide and take off the post-reading
upper guide.
Fig.4-44
(8) Take off the platen roller and post-reading
roller.
Fig.4-45
(1) Take off the platen roller and post-reading
roller.
( P.4-14 "[K] Platen roller / post-reading
roller")
(2) Remove 1 E-ring, 1 pulley, 1 pin and 1 bush-
ing from the rear side of the reverse registra-
tion roller shaft.
Fig.4-46
Post-reading
upper guide
Post-reading roller
Platen roller
Pin Bushing
Bushing
E-ring
Pulley