Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY
4 - 23
4
[F] Original exit/reverse motor (M3)
(1) Take off the original feed motor drive section.
( P.4-21 "[E] Original feed motor drive sec-
tion")
(2) Disconnect 1 connector from the RADF con-
trol PC board.
Fig.4-63
(3) Remove 2 screws, and then take off the orig-
inal exit/reverse motor with its bracket.
Fig.4-64
(4) Remove 2 screws, and then take off the orig-
inal exit/reverse motor by sliding it from the
bracket.
Fig.4-65
Original exit/reverse motor
Bracket
Original exit/reverse motor