Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 GENERAL DESCRIPTION
2 - 1
2
2. GENERAL DESCRIPTION
2.1 Main Components
Fig.2-1
Location Components
Feeding/Transporting
section
Pickup roller
Feed roller
Separation roller
Registration roller
Intermediate transfer roller
Pre-reading roller
Platen roller
Post-reading roller
Exit/reverse roller
Reverse registration roller
Original empty sensor (S3)
Original length detection sensor (S4)
Original registration sensor (S5)
Original width detection sensor-1 (S6)
Original width detection sensor-2 (S7)
Original intermediate transport sensor(S8)
Read sensor (S9)
Original exit/reverse sensor (S10)
Jam access cover sensor (S11)
Original tray section Original width guide
Original tray
Original reverse tray
Original tray sensor (S1)
Original tray width sensor (S2)
Original exit tray section Original exit tray
Drive/Control section Original feed motor (M1)
Read motor (M2)
Original exit/reverse motor (M3)
Fan motor (M4)
Original pickup solenoid (SOL1)
Gate solenoid (SOL2)
RADF opening/closing sensor (S12)
Jam access cover opening/closing switch (SW1)
RADF control PC board (ADF)
Original exit tray section
Original tray section
Drive/Control section
Feeding/Transporting section