Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 Adjustment
5 - 7
5
[B] Adjustment
(1) Close the RADF.
(2) Adjust it by turning the adjustment screws on the hinges.
• Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
Fig.5-15
• Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwis .................... Lowered
Turn it counterclockwise ...... Heightened
Fig.5-16