Filter
Top Products
MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC
4 - 26
4.5 Sensor/switch
[A] Original tray width sensor (S2)
[B] Original tray sensor (S1)
(1) Take off the original reverse tray.
( P.4-5 "[F] Original reverse tray")
(2) Remove 2 screws. Release 8 latches and
separate the original tray into 2 parts.
Fig.4-72
(3) Remove 1 screw and take off the original tray
width sensor.
Fig.4-73
(1) Take off the original reverse tray.
( P.4-5 "[F] Original reverse tray")
(2) Remove 2 screws. Release 8 latches and
separate the original tray into 2 parts.
Fig.4-74
Original tray
width sensor