Filter
Top Products
MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC
4 - 32
[L] RADF opening/closing sensor (S12)
(4) Remove 2 screws. Open the post-reading
lower guide and take off the post-reading
upper guide.
Fig.4-90
(5) Release 2 latches and take off the Original
exit/reverse sensor from the post-reading
upper guide.
Fig.4-91
(1) Take off the rear cover.
( P.4-2 "[B] Rear cover")
(2) Disconnect 1 connector. Release 2 latches
and take off the RADF opening/closing sen-
sor.
Fig.4-92
Post-reading
upper guide
Original exit/reverse sensor
RADF opening/closing sensor