Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY
4 - 29
4
[E] Original length detection sensor (S4)
[F] Original registration sensor (S5)
(4) Disconnect 1 connector. Release 2 latches
and take off the original empty sensor.
Fig.4-81
(1) Take off the feeder lower guide.
( P.4-10 "[E] Feeder lower guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original length detection sen-
sor.
Fig.4-82
(1) Take off the feeder lower guide.
( P.4-10 "[E] Feeder lower guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original registration sensor.
Fig.4-83
Original empty sensor
Original length detection sensor
Original registration sensor