Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY
4 - 31
4
[J] Intermediate transport sensor (S8)
[K] Original exit/reverse sensor (S10)
(1) Take off the pre-reading upper guide.
( P.4-13 "[H] Pre-reading lower guide /
pre-reading upper guide")
(2) Release 2 latches and take off the intermedi-
ate transport sensor from the pre-reading
upper guide.
Fig.4-87
(1) Take off the pre-reading lower guide.
( P.4-13 "[H] Pre-reading lower guide /
pre-reading upper guide")
(2) Disconnect 1 connector.
Fig.4-88
(3) Open the RADF. Remove 2 screws, and then
take off 2 holders and platen guide.
Fig.4-89
Intermediate transport sensor
Connector
Holder Screw
Platen guide
ScrewHolder