Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY
4 - 7
4
[B] Pickup roller [PM]
[C] Feed roller [PM]
(1) Take off the paper feeder unit.
( P.4-6 "[A] Paper feeder unit")
(2) Remove 1 clip and pull out the shaft. Take off
the pickup roller.
Fig.4-17
Notes:
1. Be careful not to drop the pin because it
will come off when the shaft is pulled out.
2. Make sure you assemble the pickup roller
with the one-way clutch in the correct
direction.
Fig.4-18
(1) Take off the paper feeder unit.
( P.4-6 "[A] Paper feeder unit")
(2) Remove 1 clip.
Fig.4-19
Clip Pickup roller
Shaft Pin
T.B.D.
Lock Lock
T.B.D.
Clip