Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY
4 - 9
4
[D] Separation roller [PM]
(1) Take off the paper feeder unit.
( P.4-6 "[A] Paper feeder unit")
(2) Remove 2 screws. Slide the feeder upper
guide to the right and raise it.
Note: Note:
Do not pull the harness out with too much
force.
Fig.4-23
(3) Remove 2 screws and take off the separation
roller holder and separation roller unit.
Fig.4-24
(4) Remove 1 bushing and clip, and then take off
the separation roller.
Fig.4-25
Feeder upper guide Screw
Screw
Separation roller unit Screw
Separation roller holder
T.B.D.
Separation roller
Bushing
Clip