Filter
Top Products
MR-3018 DISASSEMBLY AND ASSEMBLY June 2005 © TOSHIBA TEC
4 - 30
[G] Original width detection sensor-1 (S6)
[H] Original width detection sensor-2 (S7)
[I] Read sensor (S9)
(1) Take off the feeder lower guide.
( P.4-10 "[E] Feeder lower guide")
(2) Take off the actuator.
(3) Disconnect 1 connector. Release 2 latches
and take off the original width detection sen-
sor-1.
Fig.4-84
(1) Take off the feeder lower guide.
( P.4-10 "[E] Feeder lower guide")
(2) Take off the actuator.
(3) Disconnect 1 connector. Release 2 latches
and take off the Original width detection sen-
sor-2.
Fig.4-85
(1) Take off the pre-reading upper guide.
( P.4-13 "[H] Pre-reading lower guide /
pre-reading upper guide")
(2) Release 2 latches and take off the read sen-
sor from the pre-reading upper guide.
Fig.4-86
Actuator Original width detection sensor-1
Actuator Original width detection sensor-2
Read sensor