Filter
Top Products
June 2005 © TOSHIBA TEC MR-3018 DISASSEMBLY AND ASSEMBLY
4 - 15
4
(3) Take off the read motor drive section.
( P.4-19 "[C] Read motor drive section")
(4) Remove 1 bushing, 1 E-ring and 1 pulley
from the rear side of the post-reading roller
shaft. Loosen 2 setscrews and take off 1
flange. Take off 1 bearing.
Fig.4-41
(5) Remove 1 clip and 1 bushing from the front
side of the post-reading roller shaft.
Fig.4-42
(6) Open the RADF. Remove 4 screws, take off
2 holders and platen guide.
Fig.4-43
Bushing E-ring Pulley
Flange
Bearing
Bushing Clip
Holder Screw
Platen guide
ScrewHolder
Screw
Screw