Filter
Top Products
Satellite R10 6-13
Power and Power-Up Modes
6. Slide the battery release latch (➀) to free the battery pack for removal
(➁), then slide out the battery pack.
Releasing the battery pack (2)
7. Return your computer to the upright position.
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack (➀).
5. Secure the battery pack lock. Check the battery lock was changed to
the lock position ( ) (➁).
Securing the battery cover
6. Return your computer to the upright position.
BATTERY RELEASE
LATCH
BATTERY PACK
For environmental reasons, do not throw away a spent battery pack. Please
return spent battery packs to your TOSHIBA dealer.
■ The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as
required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not touch the battery release latch while holding the computer. Or
you may get injured by the dropped battery pack by unintentional release
of the battery release latch.
BATTERY PACK
BATTERY LOCK