Toshiba R10 Laptop User Manual


 
Satellite R10 4-3
Operating Basics
Observe the following precautions on the handling of the Tablet PC Pen.
Do not tap or press the Tablet PC Pen forcefully against the Display
screen. It could damage the Tablet PC Pen and Display screen.
Avoid using or keeping the Tablet PC Pen in the place of rapid
temperature change or in a car where the Tablet PC Pen is exposed to
direct sunbeam. Keep the Tablet PC Pen without pressure constantly
applied to the switch of the Tablet PC Pen. Constant pressure to the
button causes a malfunction or characteristic deterioration.
The Tablet PC Pen is composed of precision parts. Do not drop the
Tablet PC Pen. Strong impact causes a malfunction or characteristic
deterioration.
Do not apply excessive force to the Tablet PC Pen point and the side
switch. Excessive force applied to these parts causes short life or
characteristic deterioration (Allowable force to pen point, Eraser button,
Pen button: less than 1 kg, for less than 30 seconds).
Avoid water to enter in the Tablet PC Pen or dew condensation. Intrusion
of water or dew condensation causes malfunction.
Do not disassemble the Tablet PC Pen. It causes maladjustment or short
life.
Do not stain the Tablet PC Pen with cosmetics or chemicals. It causes
deterioration of appearance. Use a glass wiping cloth or dry cloth to
clean the Tablet PC Pen when cleaning. Do not use volatile liquid such
as alcohol, thinner or petroleum benzine.
Do not apply excessive force to the Tablet PC Pen point. Crooked or
deformed pen point due to excessive force causes malfunction.
Keep the small parts of the Tablet PC Pen such as the pen point or the
knob of the side switch away from infant to prevent them to swallow.
Do not use a ball point pen instead of the Tablet PC Pen delivered with
the product.
Do not use a broken pen tip.
The lead cannot be replaced if it is worn (Reserve Pen only).
TOSHIBA is not liable for problems of the products due to the use of the
Tablet PC Pen in an environment where above conditions are not satisfied
or because of the use by unspecified number of users.