Filter
Top Products
Satellite R10 7-7
HW Setup
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB KB/Mouse Legacy Emulation item to
Enabled.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Button Setting
Standby
Set this option for high speed recovery from the Standby mode.
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set to
ECP (Default).
Standard
Bi-directional
This setting should be used with some other
parallel devices.
Enabled Enables the USB KB/Mouse Legacy Emulation
(Default).
Disabled Disables the USB KB/Mouse Legacy Emulation.
Enabled Enables the USB-FDD Legacy Emulation
(Default).
Disabled Disables the USB-FDD Legacy Emulation.
Fast Recover from the Standby mode at high speed.
Please ensure that the AC adaptor is connected
when selecting this mode.
Normal Recover from Standby mode at normal speed.