Filter
Top Products
156 VISIONEER STROBE XP 220 SCANNER USER’S GUIDE
To turn AutoLaunch Off/On for Windows 2000, you will use the
TWAIN interface:
The following steps use PaperPort to access the TWAIN interface, but
you can also use other applications which access it. If you use another
application, please see its user’s guide for the steps to access the TWAIN
interface.
1. On the Windows taskbar, click Start, point to Programs, point to
PaperPort, then click PaperPort.
The PaperPort desktop opens.
2. Click the Scan icon on the PaperPort command bar.
3. From the Scanner drop-down list, select Visioneer Strobe XP 220.
4. Click the Scan button on the Scan pane.
The PaperPort TWAIN interface opens.
If the Scan button is not active, you may have to set up your
scanner first to use PaperPort. See “Setting Up Your Scanner to
Work with PaperPort” on page 129.
5. Click the scanner icon at the top right corner of the window.
Click this icon.