Filter
Top Products
Vixel Model 335 Installation & Configuration Guide CHAPTER 3 Management
18
To change the Time Mode:
1. From the Time Mode drop-down box, select the desired time setting.
2. Click Submit.
To use a time server:
1. Select Server in the Time Mode drop-down box.
2. Enter the IP Address for the time server in the Time Server text box.
3. Enter the desired update interval in minutes in the Time Server Update Interval (min)
text box.
4. Click Sync to Server Time to immediately synchronize the server time to the time
server at the designated IP Address.
5. Click Submit.
To set the time setting to the computer connected to the switch, click the Sync to PC
Time Now Sync button and then click Submit.
Note: Clicking Back on the
browser tool bar may not
update settings due to web
browser caching pages in
memory.
To view the new time settings, click Back to Time page.
Firmware Settings
The Firmware page displays information on the current firmware version, the alternate
firmware version, and the version of the software that loads the firmware image on boot
up.
To view the current firmware settings:
1. Click System. The System Information page appears.
2. Click Firmware. The Firmware Information page appears.
Figure 3-6. Firmware Information Page
Setting Description
none The switch does not set the time.
Server The switch receives the time from a time server via
Ethernet.
User The user manually sets the time for the switch.