Filter
Top Products
Vixel Model 335 Installation & Configuration Guide CHAPTER 3 Management
51
Viewing the Event Log
The event log command enables you to view the event log.
To activate the event log command, type: ev at the prompt.
The switch event log is very good for troubleshooting, as it shows the events on the
switch including bypass events, LIP F8, clock delta, etc.
For a complete list of event messages, see EVENT MESSAGES (APPENDIX C) on page 63.
Resetting the Switch
You can reset the switch to implement changes in the CLI.
To reset the switch, type rs at the prompt.
A message stating the switch is resetting appears.
Resetting the Hardware
This feature resets the ASIC in the switch.
To reset the ASIC, type rh at the prompt.
A message stating the control circuitry is resetting appears.
Resetting the Switch to Factory Default Settings
If you want to reset the current switch configuration to the factory default settings, type
rc at the prompt.
A message appears asking you to confirm the reset. Type Y at the prompt to proceed
with the reset.
Test before
insert
Before allowing a port to insert into a zone, the port is monitored for
proper Loop Port State Machine (LPSM) protocols. (At least one of the
devices on the port must be a Loop Initialization Master (LIM) to follow
these protocols.)
Overlapping
zones
Note: This setting should not be modified unless directed to do so by Vixel
Customer Support.
Util period
avg
Note: This setting should not be modified unless directed to do so by Vixel
Customer Support.
Util period
stats
Note: This setting should not be modified unless directed to do so by Vixel
Customer Support.
Reset counters
Resets all or specific counters to zero.
Options:
2: reset all port counters
3: reset port RX frame counter
4: reset port conn attempts counter
5: reset port conn busy counter
6: reset port CRC errors counter
7: reset port bad OS errors counter
To reset counters, type 10 at the prompt. Type the number for the
desired option.
Setting Description
1: 02/27/02 18:38:12.62 [1] agent up
2: 02/27/02 18:38:12.72 [160] management active
3: 02/27/02 18:38:12.72 [3] switch added, switch ID=14000147
4: 02/27/02 18:38:12.81 [270] Daytime server up, ip=38.244.18.9