Filter
Top Products
Vixel Model 335 Installation & Configuration Guide CHAPTER 3 Management
43
Changing the CLI/Web Password
Note: If you do not
remember your password,
call your customer service
representative.
One password is used to access both the Web Manager and the Command Line
Interface. You can change the password through the Command Line Interface (CLI)
only. The password must be between 6 and 25 characters in length.
To change the password:
1. Type pw at the prompt.
2. Enter the current password (the default password is password).
3. Enter the new password.
4. Confirm the new password by re-entering it.
A message appears confirming that the password was saved and activated.
Viewing Management, Policy, and Threshold Settings
The Management Agent menu displays the current settings for the switch parameters,
switch policies, and thresholding. To view the current Management Agent settings and a
complete list of commands, type mc at the prompt. The Management Agent Menu
appears.
>pw
enter current password: ********
enter new password : ******
re-enter new password : ******
The new password is saved and activated.
MANAGEMENT AGENT 00-10-9b-01-0c-dd
Product : Vixel 335 Managed Storage Switch
Firmware : 2.01 (build 79)
Hardware : 3
IP address : 172.16.71.14
Netmask : 255.255.240.0
Default gateway : 172.16.64.1
DHCP : disabled
Management URL : http://172.16.71.14
POLICIES:
(1) Smart insertion : enabled
(2) Bad zone recovery : disabled
(3) No data recovery : disabled
(4) LIP F8 recovery : enabled
(5) LIP on port bypass : enabled
(6) Auto cascade : enabled
(7) Bypass at max OS err : disabled
(8) Bypass at max CRC err : disabled
(9) Bypass on clock delta err : disabled
(10) Bypass on switch stall : disabled
(11) Clear conn on sw stall : disabled
HW I/F:
ASIC build number : 0x0001
(12) OS error threshold : 3 (0x3)
(13) CRC error threshold : 3 (0x3)
(14) Switch stall threshold : 65535 (0xFFFF)
(15) Clk error thresh (ppm) : 200 (0xC8)
(16) Clk error prescale (1-16) : 6
(17) Err count thresh (CSecs) : 1000
(18) Bad zone thresh (CSecs) : 500
(19) Bad zone bypass (CSecs) : 10
ACTIONS:
(20) Reset switch
(21) Reset HW
(22) Reset counters
(23) Event log
(24) Fibre Alliance event log
(25) Fibre Alliance event sev : Info