Filter
Top Products
Vixel Model 335 Installation & Configuration Guide CHAPTER 3 Management
21
OS Information
The Ordered Sets Information page displays the Ordered Sets that are being transmitted
on the switch by their associated port number.
To view the Ordered Sets Information page:
1. Click FC Switch. The FC Switch Information page appears.
2. Click OS Info. The Ordered Set Information page.
Figure 3-10. Ordered Set Information Page
If there is a connection, then the Ordered Set transmission information for that
connection is depicted by an "X".
A list of the Ordered Sets and their indications follows:
Detection Indication
Non-Overlap Zone Displays the zone for which the port is configured.
Transceiver Displays the status of the inserted transceiver in the port.
Sync A stable signal has been detected and IDLEs transmitted.
Match The ordered set or pattern selected under the Match area has
been detected.
EOF An End-of-Frame (EOF) delimiter has been detected; frames are
present on the loop. (An EOF immediately follows the CRC of a
frame and signals the frame’s end.)
SOF A Start-of-Frame (SOF) delimiter has been detected; frames are
present on the loop.
IDLE Sequences of IDLEs are being transmitted to maintain link
activity; no other data is being transmitted.
ARBff ARB(FF)s are being transmitted to maintain link activity; no
other data is being transmitted.
ARB A port is arbitrating for loop access to perform a task.