Filter
Top Products
Vixel Model 335 Installation & Configuration Guide APPENDIX B CLI Console Commands
62
Configure Non-
overlapping Zones
noz
noz z:p,p,p.. z:p
p.. z..
Configures ports for non-overlapping zones.
Values:
z = zone number 1 to 12
p = port number 1 to 12
Note:
Unspecified ports are placed into zone 1.
Each port must be in one non-overlapping zone
only.
Ports on a zone may be separated by a comma or
spaces.
Configure
Overlapping Zones
(Port blocks in
switching mode)
oz
oz a:p1-p2 a:p1-
p2 r:p1-p2 ..
oz r
Configures ports for overlapping zones.
Values:
a = add port block pair
r = remove port block pair
p1 = 1st port (must be in non overlapping zone 1)
p2 = 2nd port (must be in non overlapping zone 1)
“-” is optional
r = remove all port blocks
Set Management
URL
url=
url=<value>
Sets the Fibre Alliance URL value. Use "-" to reset
to default.
Set Daytime Server
IP Address
ipt Sets the IP Address for the daytime server.
Set Daytime Server
Update Period
dlyt Sets the interval for validating switch time with the
daytime server.
Set Time Mode time Sets the switch time manually.
Command Syntax Action