Filter
Top Products
Chapter 28 Introducing the SMT
ZyWALL 2WG User’s Guide
532
Figure 328 Initial Screen
28.2.2 Entering the Password
The login screen appears after you press [ENTER], prompting you to enter the password, as
shown below.
For your first login, enter the default password “1234”. As you type the password, the screen
displays an “X” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your
ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,
press [ENTER] to bring up the login screen again.
Figure 329 Password Screen
28.3 Navigating the SMT Interface
The SMT is an interface that you use to configure your ZyWALL.
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:00:AA:77:90:79
initialize ch =1, ethernet address: 00:00:AA:77:90:7A
initialize ch =2, ethernet address: 00:00:AA:77:90:7B
initialize ch =3, ethernet address: 00:00:AA:77:90:79
initialize ch =4, ethernet address: 00:00:AA:77:90:7C
initialize ch =5, ethernet address: 06:00:AA:77:90:79
initialize ch =6, ethernet address: 0A:00:AA:77:90:79
initialize ch =7, ethernet address: 0E:00:AA:77:90:79
initialize ch =8, ethernet address: 12:00:AA:77:90:79
initialize ch =9, ethernet address: 16:00:AA:77:90:79
initialize ch =10, ethernet address: 1A:00:AA:77:90:79
initialize ch =11, ethernet address: 1E:00:AA:77:90:79
AUX port init .. done
Modem 1 init . inactive
Modem 2 init . done
Press ENTER to continue...
Enter Password : XXXX