Filter
Top Products
Chapter 48 Troubleshooting
ZyWALL 2WG User’s Guide
690
See the troubleshooting suggestions for I cannot see or access the Login screen in the web
configurator. Ignore the suggestions about your browser.
V I cannot use FTP to upload / download the configuration file. / I cannot use
FTP to upload new firmware.
See the troubleshooting suggestions for I cannot see or access the Login screen in the web
configurator. Ignore the suggestions about your browser.
48.3 Internet Access
V I cannot get a WAN IP address from the ISP.
1 The ISP provides the WAN IP address after authenticating you. Authentication may be
through the user name and password, the MAC address or the host name.
The username and password apply to PPPoE and PPPoA encapsulation only. Make sure
that you have entered the correct Service Type, User Name and Password (be sure to
use the correct casing). Refer to the WAN setup chapter (web configurator or SMT).
2 Disconnect all the cables from your device, and follow the directions in the Quick Start
Guide again.
3 If the problem continues, contact your ISP.
V I cannot access the Internet.
1 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide and Section 1.4.4 on page 56.
2 Make sure you entered your ISP account information correctly in the wizard, WAN
screen or SMT menu. These fields are case-sensitive, so make sure [Caps Lock] is not
on.
3 If you are trying to access the Internet wirelessly, make sure the wireless settings in the
wireless client are the same as the settings in the AP.
4 Disconnect all the cables from your device, and follow the directions in the Quick Start
Guide again.
5 If the problem continues, contact your ISP.