Chapter 35 Wireless Setup
ZyWALL 2WG User’s Guide
580
Figure 365 Menu 7.2: TCP/IP and DHCP Ethernet Setup
The DHCP and TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP and
DHCP Ethernet Setup. Each public server will need a unique IP address. Refer to Section
31.4 on page 560 for information on how to configure these fields.
" DMZ, WLAN and LAN IP addresses must be on separate subnets. You must
also configure NAT for the WLAN port (see Chapter 38 on page 595) in menus
15.1 and 15.2.
35.1.2 IP Alias Setup
You must use menu 7.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 7.2.1 - IP Alias Setup, as shown next.
Menu 7.2 - TCP/IP and DHCP Ethernet Setup
DHCP= None TCP/IP Setup:
Client IP Pool:
Starting Address= N/A IP Address= 0.0.0.0
Size of Client IP Pool= N/A IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= N/A
Multicast= IGMP-v2
Edit IP Alias= No
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel: