Chapter 49 Product Specifications
ZyWALL 2WG User’s Guide
697
49.3 3G Card Installation
" Do not insert or remove a card with the ZyWALL turned on.
Make sure the ZyWALL is off before inserting or removing a 3G card (to avoid damage).
Slide the connector end of the card into the slot.
" Only use a compatible 3G card.
Do not force, bend or twist the 3G card.
49.4 Wall-mounting Instructions
Complete the following steps to hang your ZyWALL on a wall.
" See Table 253 on page 693 for the size of screws to use and how far apart to
place them.
1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws.
1 Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyWALL with the connection cables.
5 Align the holes on the back of the ZyWALL with the screws on the wall. Hang the
ZyWALL on the screws.