Filter
Top Products
Chapter 16 IPSec Commands
ZyWALL (ZyNOS) CLI Reference Guide
126
ipsec manualConfig lcAddrStart <ip-
address>
Sets the local network starting IP address. R+B
ipsec manualConfig lcAddrEndMask <ip-
address>
Sets the local network ending IP address for a
range or the subnet mask for a subnet.
R+B
ipsec manualConfig lcPortStart <port> Sets the starting port for local network traffic. This is
to limit the traffic sent or received in the VPN tunnel.
R+B
ipsec manualConfig lcPortEnd <port> Sets the ending port for local network traffic. This is
to limit the traffic sent or received in the VPN tunnel.
R+B
ipsec manualConfig rmAddrType
<0:single|1:range|2:subnet>
Sets the remote address type. R+B
ipsec manualConfig rmAddrStart <ip-
address>
Sets the remote network starting IP address. R+B
ipsec manualConfig rmAddrEndMask <ip-
address>
Sets the remote network ending IP address for a
range or the subnet mask for a subnet.
R+B
ipsec manualConfig rmPortStart <port> Sets the starting port for remote network traffic. This
is to limit the traffic sent or received in the VPN
tunnel.
R+B
ipsec manualConfig rmPortEnd <port> Sets the ending port for remote network traffic. This
is to limit the traffic sent or received in the VPN
tunnel.
R+B
ipsec manualConfig activeProtocol
<0:AH|1:ESP>
Sets the protocol the manual key rule uses. R+B
ipsec manualConfig ah encap
<0:Tunnel|1:Transport>
Sets the encapsulation mode when using AH
protocol in the manual rule.
R+B
ipsec manualConfig ah spi <decimal> Sets the SPI information when using AH protocol in
the manual rule.
decimal: The maximum length is 9.
R+B
ipsec manualConfig ah authAlgo
<0:MD5|1:SHA1>
Sets the authentication algorithm when using AH
protocol in the manual rule.
R+B
ipsec manualConfig ah authKey <ascii> Sets the authentication key when using AH protocol
in the manual rule.
R+B
ipsec manualConfig esp encap
<0:Tunnel|1:Transport>
Sets the encapsulation mode when using ESP
protocol in the manual rule.
R+B
ipsec manualConfig esp spi <decimal> Sets the SPI when using ESP protocol in the
manual rule.
decimal: The maximum length is 9.
R+B
ipsec manualConfig esp encryAlgo
<0:Null|1:DES|2:3DES>
Sets the encryption algorithm when using ESP
protocol in the manual rule.
R+B
ipsec manualConfig esp encryKey
<string>
Sets the encryption key when using ESP protocol in
the manual rule.
R+B
ipsec manualConfig esp authAlgo
<0:MD5|1:SHA1>
Sets the authentication algorithm when using ESP
protocol in the manual rule.
R+B
ipsec manualConfig esp authKey
<string>
Sets the authentication key when using ESP
protocol in the manual rule.
R+B
ipsec manualPolicyList Lists all manual policy rules. R+B
ipsec CRYPTIC_1141 <on|off> Turns one of the ZyWALL's hardware VPN
accelerators on or off.
R+B
Table 61 Ipsec Commands (continued)
COMMAND DESCRIPTION M