Filter
Top Products
Chapter 23 WWAN Commands
ZyWALL (ZyNOS) CLI Reference Guide
170
wwan config budgetCtrl data dir
[1|2|3]
Sets whether either transmitted (Tx) or received (Rx), or both
Tx/Rx data should be counted for budget purposes.
1:Tx
2:Rx
3:Tx and Rx
R
wwan config budgetCtrl data
enable [on|off]
Enables the recording of the amount of Tx/Rx data. This
information is used for budget management.
R
wwan config budgetCtrl data quota
[data_quota]
Sets the data limit measured in megabytes. data_quota may
be between 1 Mb to 100 Gb.
R
wwan config budgetCtrl enable
[on|off]
Enables budget control. R
wwan config budgetCtrl highLimit Sets the upper limit for the data budget. R
wwan config budgetCtrl highLimit
alert [on|off]
Sends an alert if the data limit is exceeded. R
wwan config budgetCtrl highLimit
AllowNewConn [on|off]
Allows new 3G connections to be established when the data
limit is exceeded.
R
wwan config budgetCtrl highLimit
KeepCurrConn [on|off]
Keeps the current 3G connection (ON) or drops it (OFF) if the
data limit is exceeded.
R
wwan config budgetCtrl highLimit
log [on|off]
Sends a log if the data limit is exceeded. R
wwan config budgetCtrl lowLimit Sets a data level at which to send an alert or log before the
maximum data limit is reached.
R
wwan config budgetCtrl lowLimit
alert [on|off]
Sends an alert if the warning level is reached. R
wwan config budgetCtrl lowLimit
data <%>
Sets a warning level as a percentage of the data limit. R
wwan config budgetCtrl lowLimit
log [on|off]
Sends a log if the warning level is exceeded. R
wwan config budgetCtrl lowLimit
time <%>
Sets a time for a warning as a percentage of the Internet
access time limit.
R
wwan config budgetCtrl resetDay
<day>
Sets the day of each month to reset the budget counter. R
wwan config budgetCtrl time
enable [on|off]
Enables the recording of time spent accessing the Internet for
budget control.
R
wwan config budgetCtrl time quota
[time_in_hours]
Sets the time limit for Internet access in hours. Maximum is 672
hours.
R
wwan config enable [on|off] Enables 3G Wireless WAN. R
wwan config idleTimeout
<time_in_seconds>
Sets the maximum period the connection may remain idle
before disconnection. time_in_seconds may be 1-9999
seconds.
R
wwan config multicast enable
[on|off]
Enables multicast for 3G wireless WAN. R
wwan config multicast version
[1|2]
Sets multicast to IGMP (Internet Group Management Protocol)
version 1 or 2.
1:IGMPv1
2:IGMPv2
R
Table 86 wwan Command Summary (continued)
COMMAND DESCRIPTION M