Filter
Top Products
Chapter 7 Bridge Commands
ZyWALL (ZyNOS) CLI Reference Guide
52
bridge rstp bridge enable Turns on RSTP (Rapid Spanning Tree Protocol). B
bridge rstp bridge forwardDelay
[forwarding-delay]
Sets the RSTP forwarding delay (4~30). This is the number of
seconds a bridge remains in the listening and learning port
states. The default is 15 seconds.
B
bridge rstp bridge helloTime
[hello-time]
Sets the RSTP hello time (1~10) in seconds the root bridge
waits before sending a hello packet.
B
bridge rstp bridge maxAge [max-
age]
Sets the RSTP max age (6~40). This is how many seconds a
bridge waits to get a Hello BPDU from the root bridge.
B
bridge rstp bridge priority
[priority]
Sets the ZyWALL’s RSTP bridge priority (0~61440). The lower
the number, the higher the priority. Bridge priority determines
the root bridge, which in turn determines Hello Time, Max Age
and Forward Delay.
B
bridge rstp bridge version
<STP:0|RSTP:2>
Sets the ZyWALL to use STP or RSTP. B
bridge rstp disp Displays RSTP information. B
bridge rstp port disable
<interface>
Turns off RSTP on the specified port. B
bridge rstp port edgePort
<interface> <True:1|False:0>
Sets the specified port to be an edge or non-edge port. B
bridge rstp port enable
<interface>
Turns on RSTP on the specified port. B
bridge rstp port mcheck
<interface>
Sets migrate check on this port B
bridge rstp port p2pLink
<interface>
<Auto:2|True:1|False:0>
Sets a point to point link on the specified port. B
bridge rstp port pathCost
<interface> [path-cost]
Sets the RSTP path cost on the specified port. B
bridge rstp port priority
<interface> [priority]
Sets the RSTP priority on the specified port. B
bridge rstp state Displays general RSTP status information. B
bridge rstp trace Turns on RSTP debug/trace messages. B
bridge stat clear Resets the bridging packet statistics counter. R+B
bridge stat disp Displays the bridging packet statistics table. R+B
Table 22 Bridge Commands (continued)
COMMAND DESCRIPTION M