Filter
Top Products
ZyWALL (ZyNOS) CLI Reference Guide
55
CHAPTER 8
Certificates Commands
Use these commands to configure certificates.
8.1 Command Summary
The following table describes the values required for many certificates commands.
Other values are discussed with the corresponding commands.
Table 23 Certificates Commands Input Values
LABEL DESCRIPTION
auth-key Specifies the certificate’s key for user authentication. If the key contains spaces,
put it in quotes. To leave it blank, type "".
ca-address The IP address or domain name of the CA (Certification Authority) server.
ca-cert The name of the CA certificate.
ip-
address[:port
]
Specifies the server address (required) and port (optional). The format is "server-
address[:port]". The default port is 389.
key-length The length of the key to use in creating a certificate or certificate request. Valid
options are 512, 768, 1024, 1536 and 2048 bits.
login:pswd The login name and password for the directory server, if required. The format is
"login:password".
name The identifying name of a certificate or certification request. Use up to 31
characters to identify a certificate. You may use any character (not including
spaces).
proxyurl The address and port of an optional HTTP proxy to use.
server-name A descriptive name for a directory server. Use up to 31 ASCII characters (spaces
are not permitted).
subject A certificate’s subject name and alternative name. Both are required.
The format is "subject-name-dn;{ip,dns,email}=value".
Example 1: "CN=ZyWALL,OU=CPE SW2,O=ZyXEL,C=TW;ip=172.21.177.79"
Example 2: "CN=ZyWALL,O=ZyXEL,C=TW;dns=www.zyxel.com"
Example 3: "CN=ZyWALL,O=ZyXEL,C=TW;email=dummy@zyxel.com.tw"
If the name contains spaces, put it in quotes.
timeout The verification timeout value in seconds (optional). The default timeout value is
20 seconds.
url The location of a certificate to be imported.