Filter
Top Products
Document Conventions
ZyWALL (ZyNOS) CLI Reference Guide
7
" Commands are case sensitive! Enter commands exactly as seen in the
command interface. Remember to also include underscores if required.
Copy and Paste Commands
You can copy and paste commands directly from this document into your terminal emulation
console window (such as HyperTerminal). Use right-click (not ctrl-v) to paste your command
into the console window as shown next.
interface An interface on the ZyWALL. Use the following for a ZyWALL with a single WAN
Ethernet interface.
enif0: LAN
enif1: Ethernet WAN
enif2: DMZ
enif4: Ethernet WLAN
wanif0: PPPoE or PPTP or 3G depending on which is connected first
wanif1: PPPoE or PPTP or 3G depending on which is connected second
Use the following for a ZyWALL with two WAN Ethernet interfaces.
enif0: LAN
enif1: Ethernet WAN 1
enif2: DMZ
enif3: Ethernet WAN 2
enif5: Ethernet WLAN
wanif0: PPPoE or PPTP or 3G depending on which is connected first
wanif1: PPPoE or PPTP or 3G depending on which is connected second
For some commands you can also add a colon and a 0 or 1 to specify an IP alias.
This is only for the LAN, DMZ, and WLAN interfaces. For example, enif0:0
specifies LAN IP alias 1 and enif0:1 specifies LAN IP alias 2.
hostname Hostname can be an IP address or domain name.
name Used for the name of a rule, policy, set, group and so on.
number Used for a number, for example 10, that you have to input.
Table 2 Common Command Input Values (continued)
LABEL DESCRIPTION