Chapter 21 System Commands
ZyWALL (ZyNOS) CLI Reference Guide
160
21.10 Temporarily Open Session Commands
The following section lists the Temporarily Open Session (TOS) commands.
sys threatReport av active
<yes|no>
Turns anti-virus threat reports on or off. R+B
sys threatReport av flush Discards all anti-virus report data and updates the time stamp. R+B
sys threatReport av statistic
<id:AV-ID|src:source
IP|dst:destination IP>
Displays the top anti-virus statistic records by virus name,
source IP address, or destination IP address.
R+B
sys threatReport av summary Displays a summary of the anti-virus statistics. R+B
sys threatReport debug <yes:no> Turns the threat reports debug flag on or off. R+B
sys threatReport idp active
<yes|no>
Turns IDP threat reports on or off. R+B
sys threatReport idp flush Discards all IDP report data and updates the time stamp. R+B
sys threatReport idp statistic
<id:IDP-ID|src:source
IP|dst:destination IP>
Displays the top IDP statistic records by signature ID, source
IP address, or destination IP address.
R+B
sys threatReport idp summary Displays a summary of the IDP statistics. R+B
Table 77 Threat Report Commands (continued)
COMMAND DESCRIPTION M
Table 78 TOS Commands
COMMAND DESCRIPTION M
sys tos allow_FinPshAck <on|off> Turn this on to allow packets with a FIN, PSH, or ACK flag. R+B
sys tos debug <on|off> Turns TOS debug message on or off. R+B
sys tos display Shows all runtime Temporarily Open Sessions. R+B
sys tos fwSchedule active
[on|off]
Applies the firewall schedule policy to existing sessions. R+B
sys tos fwSchedule debug
[on|off]
Turns fwSchedule debug messages on or off. R+B
sys tos listPerHost Displays the session count for each host. R+B
sys tos sessPerHost <1~10000> Sets the temporary open sessions per host limit. R+B
sys tos tempTOSDisplay Displays the temporal TOS records. R+B
sys tos tempTOSTimeout
[1~2147483647]
Sets or displays the temporal timeout value in seconds. R+B
sys tos timeout ah <1~65535> Sets the AH-session idle-timeout value (used in IPsec) in
seconds.
R+B
sys tos timeout display Displays all TOS (Temporarily Open Session) timeout
information.
R+B
sys tos timeout esp <1~65535> Sets the ESP-session idle-timeout value (used in IPsec) in
seconds.
R+B
sys tos timeout gre <1~65535> Sets the GRE-session idle-timeout value in seconds. R+B
sys tos timeout icmp <1~65535> Sets the ICMP session idle timeout value in seconds. R+B
sys tos timeout igmp <1~65535> Sets the IGMP session idle timeout value in seconds. R+B