Filter
Top Products
Chapter 21 System Commands
ZyWALL (ZyNOS) CLI Reference Guide
163
sys pwderrtm [minute] Sets or displays the password error blocking timeout value.
Brute-force password guessing protection allows you to specify
a wait-time that must expire before entering a fourth password
after three incorrect passwords have been entered.
R+B
sys reboot Restarts the ZyWALL. R+B
sys restart daily <hour> Sets the ZyWALL to restart every day at the specified hour (24
hour format).
sys restart display Shows the ZyWALL’s restart schedule.
sys restart timer <minute> Has the ZyWALL restart after the specified number of minutes.
sys roadrunner debug
<0:disable|1:enable>
Enables or disables the Roadrunner service. R
sys roadrunner display
<interface>
Displays roadrunner information for the specified interface
(enif0
or wanif0).
R
sys roadrunner restart
<interface>
Restarts the Roadrunner service on the specified interface. R
sys romreset Restores the default romfile (configuration). R+B
sys socket Displays the system socket’s ID #, type, control block address
(PCB), IP address and port number of peer device connected
to the socket (Remote Socket) and task control block (Owner).
R+B
sys stdio [minute] Sets the management session inactivity timeout value. R+B
sys updateServer debug type
<0:Disable|1:updateServer
<on|off>|2:httpClient
<on|off>|3:All>
Turns the update server debug flags on or off.
0: Disables both update server debug flags.
1: Enables or disables the update server debug flag.
2: Enables or disables the HTTP client debug flag.
3: Enables both update server debug flags.
R+B
sys updateServer display Shows the address and path of the update server (for updating
the anti-virus and IDP signatures).
R+B
sys updateServer signatureUpdate Update the anti-virus and IDP signatures. R+B
sys upnp active [0:no|1:yes] Activates or deactivates the saved UPnP settings. R
sys upnp config
[0:deny|1:permit]
Allow users to make configuration changes through UPnP. R
sys version Displays the firmware and bootbase versions. R+B
sys view <filename> Displays the specified text file. R+B
sys wdog cnt [value] Sets (0~34463) or displays the current watchdog count (in 1.6
second units).
R+B
sys wdog switch [on|off] Turns the watchdog firmware protection feature on or off. R+B
Table 80 Other sys Commands (continued)
COMMAND DESCRIPTION M