Filter
Top Products
Chapter 22 Wireless Commands
ZyWALL (ZyNOS) CLI Reference Guide
167
The following section lists the commands dealing with security profiles. The ZyWALL
supports multiple security profiles. Only one security profile is active at one time.
22.2 Command Examples
This example shows how to configure, save and display the settings of a wireless security
profile. This example uses the following settings.
Table 84 Wireless Security Profile Commands
COMMAND DESCRIPTION M
wcfg security <1-8> name <name> Sets the security profile name. R+B
wcfg security <1-8> mode
<none|wep|8021x-only|8021x-
static64|8021x-
static128|wpa|wpapsk|wpa2|wpa2mix|wp
a2psk|wpa2pskmix>
Sets the security mode for the specified security
profile.
R+B
wcfg security <1-8> wep keysize
[64|128|152] [ascii|hex]
Sets the WEP key length (in bits) and encoding
method of WEP encryption for the specified security
profile.
ascii|hex: ASCII mode or Hex mode.
R+B
wcfg security <1-8> wep auth
[shared|auto]
Sets the WEP authentication method for the
specified security profile.
R+B
wcfg security <1-8> wep key1 <key> Sets the WEP key1 for the specified security profile.
Each security profile can use up to four keys.
key: Refer to Table 83 on page 166.
R+B
wcfg security <1-8> wep key2 <key> Sets the WEP key2 for the specified security profile.
key: Refer to Table 83 on page 166.
R+B
wcfg security <1-8> wep key3 <key> Sets the WEP key3 for the specified security profile.
key: Refer to Table 83 on page 166.
R+B
wcfg security <1-8> wep key4 <key> Sets the WEP key4 for the specified security profile.
key: Refer to Table 83 on page 166.
R+B
wcfg security <1-8> wep keyindex <1-
4>
Activates one of the four WEP keys to encrypt
wireless data transmission.
R+B
wcfg security <1-8> reauthtime
<value>
Sets the time interval for wireless re-authentication
for the specified security profile.
R+B
wcfg security <1-8> idletime <value> Sets the idle time before a forced de-association. R+B
wcfg security <1-8> groupkeytime
<value>
Sets the time interval for the WPA or WPA2 group
key update.
value: 600~65535 seconds.
R+B
wcfg security <1-8> passphrase
<value>
Sets the passphrase when you selected security
mode using wpapsk, wpa2psk, or wpa2pskmix.
value: 8~63 alphanumeric characters.
R+B
wcfg security <1-8> clear Sets the specified profile to its default value. R+B
wcfg security <1-8> save Saves the specified profile’s configuration. R+B
wcfg security <1-8> show Displays the specified profile’s configuration. R+B
wcfg security display Displays all runtime security profile settings. R+B
wcfg security saveall Saves all runtime wireless security settings to the
non-volatile memory.
R+B