Filter
Top Products
ZyWALL (ZyNOS) CLI Reference Guide
67
CHAPTER 10
Configuration Commands
Use these commands to configure your configuration settings on the ZyWALL. Many of these
commands are also available in the web configurator.
10.1 Command Summary
The following table describes the values required for many config commands. Other values
are discussed with the corresponding commands.
Table 26 config Command Input Values
LABEL DESCRIPTION
day
Specifies which day. Options are
sunday|monday|tuesday|wednesday|thursday|friday|saturday.
entry#
Specifies which custom service (from 1~100). A custom service allows you to
configure a port for specific applications such as P2P applications. The available
sub-fields are:
name <string>
range <start-port><end-port>
ip-protocol <icmp|tcp|udp|tcp/udp|user-defined>
user-defined-ip <1~255>
icmp-type <0~255>
icmp-code <0~255>
mask
Describes a subnet mask in dotted decimal notation.
non-zero-
number
A non-zero number used to indicate a black or white filter rule is enabled.
rule#
Specifies which rule from in a set. A rule is used to describe an action to be
taken when a packet matches the rule description. The number of rules
available depends on the product.
See Section 10.3.2 on page 81 for a detailed description of the parameters.
rule-action
Specifies the action to take when a rule applies to a packet. The options are
permit|drop|reject.
send-email-
policy
Specifies when to send an e-mail. Options are full|hourly|daily|weekly|none.
set#
Specifies which set. A set is a named set of rules and actions applying to
packets with a specified source and destination interface. Set numbers go from
1~255. See Section 10.3.1 on page 77 for a detailed description of the
parameters.