Filter
Top Products
Chapter 10 Configuration Commands
ZyWALL (ZyNOS) CLI Reference Guide
68
The following section lists the commands for this feature.
string, e-
mail
< 31 ASCII characters.
timeout
This is measured in seconds between 0~4294967295 seconds. Editing, deleting
or inserting these values has no effect. To configure these timeout values use
tos commands, as these are global settings.
Table 26 config Command Input Values
LABEL DESCRIPTION
Table 27 config Command Summary
COMMAND DESCRIPTION M
config cli Displays the features you can configure with the config
command.
R+B
config delete anti-spam blackRule Removes the antispam blacklist. The blacklist is a list of IP
addresses of known spammers to be blocked.
R+B
config delete anti-spam whiteRule Removes the antispam whitelist. The whitelist is a list of IP
addresses known to be safe.
R+B
config delete custom-service
<entry#>
Deletes the specified custom service entry. R+B
config delete custom-service
<entry#> icmp-code
Deletes the ICMP code. This field is optional for ICMP. The
code and type of an ICMP packet together indicate the
purpose of the packet.
R+B
config delete custom-service
<entry#> icmp-type
Deletes the ICMP type. R+B
config delete custom-service
<entry#> ip-protocol
Deletes the IP protocol for a selected custom service. R+B
config delete custom-service
<entry#> name
Deletes the name of the selected custom service. R+B
config delete custom-service
<entry#> range
Deletes the port range setting for the custom service. R+B
config delete custom-service
<entry#> user-defined-ip
Deletes the IP protocol setting for the custom service. R+B
config delete firewall active Deletes the active setting in the firewall rule configuration. R+B
config delete firewall attack block Deletes the block setting in the firewall rule configuration. R+B
config delete firewall attack
block-minute
Deletes the block attack in minutes setting in the firewall
rule configuration.
R+B
config delete firewall attack max-
incomplete-high
Deletes the setting for DOS (Denial of Service) detection
based on the maximum number of sessions allowed.
R+B
config delete firewall attack max-
incomplete-low
When the ZyWALL detects a DOS attack it begins to delete
half-open sessions until it reaches a specified number of
half-open sessions. This commands deletes this set
number.
R+B
config delete firewall attack
minute-high
Deletes the setting for DOS detection based on the
maximum number of sessions allowed per minute.
R+B
config delete firewall attack
minute-low
When the ZyWALL detects a DOS attack it begins to delete
half-open sessions until it reaches a specified number of
half-open sessions per minute. This commands deletes this
set number.
R+B